|
Specifications
|
| Technology |
| Standard |
3GPP Release 11 Long Term Evolution (LTE), fallback 3GPP Release 7,8,9 for HSPA/UMTS |
|
IEEE 802.11ac wireless local area network (WLAN), Backward support 802.11n/g/a/b Wireless LAN |
|
IEEE 802.3u 100Base-TX Fast Ethernet |
|
IEEE 802.3ab 1000Base-T Gigabit Ethernet copper |
|
IEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP) |
|
IEEE 802.1Q for VLAN |
| Interface |
| Ethernet Port |
2 x 100/1000MBase-T RJ45, Auto Negotiation |
| System LED |
1 x PWR: Green On
1 x SYS: Ready: Green On, Firmware Updating: Green Blinking
1 x DO: Red On
2 x Ethernet Ports (Port 1/2): Link: Green On, Activity: Green Blinking
2 x Serial Ports (Serial 1/2): Activity: Green Blinking
6 x Radio (Ra, Rb, Rc, Rd, Re, Rf): Radio status
Ra: AP mode: Green On, Station mode connected: Green Blinking, Station mode/radio disable: Off
Rb/Rc: Reserved
Rd: SIM detected: Green On, SIM not inserted: Off
Re: Base station connected: Green On, Base station disconnected: Off
Rf: 4G connection: Green On, 2/3G connection: Off |
| USB |
1 x USB for Configuration/Firmware Update |
| Reset |
System Reset(2~6 Seconds) / Default Settings Reset (over 7 Seconds) |
| SMA Socket |
5 xRP-SMA Female for: LTE 2T2R (LTE Main, LTE Aux) + Wi-Fi 2T2R (Wi-Fi1, Wi-Fi2) + GPS |
| SIM Socket |
2 x Nano SIM |
| Micro SD |
1 x for field diagnostic data logging |
| Serial |
2 x RS232/422/485, DB9 |
| Power Input, Digital Output |
6-Pin Removable Terminal Block Connector
4 Pin for Redundant Power
2 Pin for DO (Relay Alarm)
DO: Dry Relay Output with 1A /24V DC |
| Cellular Properties |
| Standard |
GSM/GPRS/EDGE 3GPP Pelease 6
UMTS/HSPA 3GPP Release 8
LTE 3GPP Release 11 |
| Data Rate |
GPRS: DL: max. 85.6 kbps, UL: max.85.6 kbps
EDGE: DL: max. 236.8 kbps, UL: max. 236.8 kbps
HSPA: DL: max. 42 Mbps, UL: max. 5.76 Mbps
LTE-FDD Cat.4: DL: max. 150 Mbps, UL: max. 50 Mbps, 2x2 DL MIMO
LTE-TDD Cat.4: DL: max. 130 Mbps, UL: max. 35 Mbps, 2x2 DL MIMO |
| Band Information: LTE-E |
LTE: FDD B1/B3/B5/B7/B8/B20 (2100/1800/850/2600/900/800MHz)
LTE: TDD B38/B40/B41 (2600/2300/2500MHz)
WCDMA: FDD B1/B5/B8 (2100/850/900MHz)
GSM: B3/B8 (1800/900MHz) |
| Band Information: LTE-AU |
LTE: FDD B1/B2/B3/B4/B5/B7/B8/B28(2100/1900/1800/1700/850/2600/900/700MHz)
LTE: TDD B40 (2300MHz)
WCDMA: FDD B1/B2/B5/B8 (2100/1900/850/900MHz)
GSM: B2/B3/B5/B8 (1900/1800/850/900MHz) |
| Band Information: LTE-U |
LTE: FDD B2/B4/B12 (1900/1700/700MHz)
WCDMA: B2/B4/B5 (1900/1700/850MHz) |
| Band Information: LTE-CN |
LTE FDD: B1/B3/B5/B8 (2100/1800/850/900MHz)
LTE TDD: B38/B39/B40/B41 (2600/1900/2300/2500MHz)
TD-SCDMA: B34/B39 (2000/1900MHz)
WCDMA: B1/B8 (2100/900MHz)
CDMA: BC0
GSM: 900/1800MHz |
| Wi-Fi Properties |
| Standard |
IEEE 802.11ac/a/b/g/n, 2T2R MINO
802.11ac: OFDM (BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM) |
| Data Rate |
802.11ac: MCS0~9, max. 866Mbps
802.11b: 11Mbps / 802.11a/g: 54Mbps / 802.11n: MCS0~15, max.300Mbps
Check detail TX/RX information in User Manual |
| Frequency |
ISM Band, 2.412GHz~2.472GHz, 5.180MHz~5.825MHz(Band 1,4) |
| RSSI |
≦20db, compliant with CE request |
| GPS Properties (Optipnal) |
| GNSS |
GPS/GLONASS/BeiDou/Galileo |
| Performance |
Cold start: 18s, Warm start: 2.2s, Hot start: 1.8s |
| Sensitivity |
Cold start: -146dBm, Reacquisition: -157dBm, Tracking: -157dBm |
| Accuracy |
< 1.5M |
| GNSS Frequency |
GPS/Galileo: 1575.42±1.023 MHz
GLONASS: 1597.5~1605.8 MHz
BeiDou: 1561.098±2.046 MHz |
| Antenna |
Frequency range: 1561~1615MHz
Polarization: RHCP or linear
VSWR: <2 (Typ.)
Passive antenna gain: >0dBi |
| Software |
| Management Interface |
CGI WebGUI, Command Line Interface (CLI), Telnet, SNMP |
| Time Managemant |
SNTP, Cellular Time |
| Network Management |
IPv4, SNMP v1/v2c/v3/Trap, MIBs, DHCP server/client, TFTP |
| Traffic Management |
NAT Routing, Traffic Control |
| Security |
Firewall, DMZ, Port Forwarding, HTTPs, SSH |
| Redundancy Protocol |
Rapid Spanning Tree Protocol (RSTP) |
| VPN |
IPsec, OpenVPN (server/ client) |
| Cellular Configuration |
Radio on/off, 4G LTE/3G HSPA Configuration, SIM Security, Connection Status, Cellular to Eth-WAN Redundancy, GPS positioning |
| WLAN Configuration |
WLAN Basic Settings: Radio on/off, 2.4G 11n/5G 11ac Band and Frequency selection, SSID/Multi-SSID configuration, SSID broadcast, VLAN ID, WLAN to LAN Link fault pass-through, Cellular to WLAN Auto Offload and advanced WLAN settings, 802.1X |
| Power Requirement |
| Input Voltage |
24V(12~48VDC) |
| Reverse Polarity Protect |
Yes |
| Input Current |
0.26A@24V |
| Power Consumption |
Max 6.24W@24VDC full traffic, suggest to reserve 15% tolerance |
| Mechanical |
| Installation |
DIN Rail |
| Enclosure Material |
Steel Metal with Aluminum |
| Dimension |
50(W) x 151(H) x 120(D) mm / without DIN Rail Clip |
| Ingress Protection |
IP30 |
| Weight |
≒660g without package |
| Environmental |
| Operating Temperature & Humidity |
-40°C~75°C , 5%~95% Non-Condensing |
| Storage Temperature |
-40°C~85°C |
| MTBF |
>200,000 hours |
| Warranty |
5 years |
| Approval |
| Safety |
EN60950-1 Compliance |
| EMC |
EN61000-6-2/EN61000-6-4 |
| EMI |
CISPR 22, FCC part 15B Class A |
| EMS |
EN61000-4-2 ESD, EN61000-4-3 RS, EN61000-4-4 EFT, EN61000-4-5, EN61000-4-6 CS, EN61000-4-8 Magnetic Field |
| Radio |
RED Compliance
Safety: EN 62368-1
EN 50385/EN62311 MPE assessment
EN 301 489-1/17/19/52, EN 55032/55024
EN 300 328/EN 301 893
EN 301 908-1
FCC Part 15B |
| Railway |
EN50121-4 |
.jpg)
